6.2.3
Programming the CLn group cleaning mode
With the Synchronika you have the option to program a reminder for next the group cleaning at the PID
display. The machine is set to 0 at the time of delivery, so no reminder is programmed yet.
Please take the following steps to program the cleaning reminder:
–
+
at the same time and "t1" will appear on the display.
Press
and
–
button until you reach "CLn". Press
Press the
menu.
Now you can carry out the programming in steps of 10 (0-200) by
–
+
pressing
and
. In order to leave the programming mode, wait until
"CLn" appears and then press the
least 10 brewing cycles until the temperature indication re-appears on
the display (see 7.2 Brew group cleaning).
For example, if you have programmed 90, then you will be prompted
with a "CLn" on the display to clean the brew group after 90 brewing
cycles. Clean the brew group in such a manner that the brew group is
flushed with at
We recommend a cleaning of the brew group after about 90 to 140 brewing cycles. As a
brew cycle only a brew over 15 seconds is counted.
6.2.4
Programming the ECO mode
The ECO mode gives you the opportunity to set an automatic switch off after a preset time.
The factory setting is 90 min. The Eco mode activates a countdown after the last brewing operation, which
will be running in the background and switches the machine off after 90 minutes.
To reactivate the Machine, move the brew lever into the upper position and the Machine will heat-up again.
You can also switch the main switch Off and On again.
1. Switch on the machine.
–
+
at the same time and "t1" will appear on the display.
2. Press
and
–
button until you reach "Eco". Press
3. Press the
menu.
4. Now you can carry out the programming in steps of 30 min by pressing
–
+
and
In order to leave the programming mode, wait a short time and
the menu will be left automatically.
5. After a short period, the setting will be adapted and saved.
Translation of the original German user manual
+
to enter the CLn
–
button.
+
to enter the Eco
ENGLISH
32