4. Quickly press
the nominal temperature value.
5. Please wait a short while after having set the nominal temperature
value;
't1' will be displayed.
–
in order to display 't2' (steam boiler).
6. Press
If you would like to change just 't2' and leave 't1' unchanged, press
–
after step 2 in order to progress directly to 't2' and skip 't1'.
Continue with step 7.
+
in order to progress to the submenu of 't2' and to change
7. Press
the temperature value. The nominal temperature value is displayed.
8. Quickly press
the nominal temperature value.
9. Please wait a short while after having set the nominal temperature
value;
't1' will be displayed.
–
10. Press 2 x
in order to leave the programming mode. The newly
programmed nominal temperatures are now saved. Both heaters
are now activated successively.
Programming the Temperature Mode "o"
6.2.2
You can also set whether the temperature values of t1 and t2 should be displayed in °C or °F.
To adjust this setting, proceed as follows:
–
+
at the same time and "t1" will appear on the display.
1. Press
and
–
2. Press the button
+
Press
to enter the menu.
3. Now you can choose between C for Celsius and F for Fahrenheit by
–
pressing
. This will also set t2.
4. Wait a short time and you will exit the menu automatically.
Translation of the original German user manual
–
to decrease
+
to increase
–
to decrease
+
to increase
twice. After t1, and t2, "o" appears on the display.
ENGLISH
31