Advertenties
Beschikbare talen
Beschikbare talen
USER MANUAL
Solution/clean water tank emptying
6.
Perform steps 1 to 4.
7.
Empty the solution tank with the hose (17). After working, rinse the tank with clean water.
Cylindrical brush debris container emptying (only for cylindrical brush deck)
8.
Stop the machine.
9.
Lower the cylindrical brush deck and remove the debris container (D, Fig. 3) by pulling it on one side with the handle (E).
10.
Empty and wash the debris container (D), and then install it by engaging it on the retainers.
AFTER USING THE MACHINE
After working, before leaving the machine:
1.
Remove the brushes/pad-holders according to the procedure shown in the relevant paragraph.
2.
Empty the tanks (20 and 21) and the debris container (D, Fig. 3) as shown in the relevant paragraph.
3.
Perform the daily maintenance procedures (see the Maintenance chapter).
4.
Store the machine in a clean and dry place, with the brushes/pad-holders and the squeegee lifted or removed.
MACHINE LONG INACTIVITY
If the machine is not going to be used for more than 30 days, proceed as follows:
1.
Perform the procedures shown in After Machine Use paragraph.
2.
Disconnect the battery connector (12).
FIRST PERIOD OF USE
After the first 8 hours, check the machine fastening and connecting parts for proper tightening and check the visible parts for
integrity and leakage.
24
All manuals and user guides at all-guides.com
909 6752 000(2)2006-10 A
Advertenties
Hoofdstukken
