Installing Option Cards In The Inverter; Dynamic Power Reduction By Means Of Inverter - Fronius Primo 3.0-1 Bedieningshandleiding
Verberg thumbnails
Zie ook voor Primo 3.0-1:
- Bedieningshandleiding (176 pagina's) ,
- Gebruiksaanwijzing (172 pagina's) ,
- Installatiehandleiding (48 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Data network with 3 inverters and a Fronius Sensor Box:
- Inverter 1 with Fronius Datamanager
- Inverters 2 and 3 without Fronius Datamanager!
The external communication (Fronius Solar Net) takes place on the inverter via
the data communication area. The data communication area contains two RS 422
interfaces as inputs and outputs. RJ45 plug connectors are used to make the
connection.
IMPORTANT! Since the Fronius Datamanager functions as a data logger, the
Fronius Solar Net ring must not include any other data logger.
Only one Fronius Datamanager per Fronius Solar Net ring!
Any other Fronius Datamanagers must be removed and the unoccupied option
card compartment sealed off using the blanking cover (42,0405,2020 - available
from Fronius as an optional extra); alternatively, use an inverter without Fronius
Datamanager (light version).
Installing option
Information on installing option cards (e.g.: Datamanager) in the inverter and
cards in the in-
connecting the data communication cable can be found in the Installation In-
verter
structions.
Dynamic power
Energy companies or grid operators may impose feed-in limits on an inverter. Dy-
reduction by
namic power reduction takes account of self-consumption by the household be-
means of invert-
fore the power of an inverter is reduced:
er
A counter for determining self-consumption of the S0 can be connected directly
to the inverter – see chapter
on page
A feed-in limit can be set in the Basic menu under Signal input – S0 meter – see
chapter
Setting options for S0 meter:
-
-
Zero feed-in is possible with this configuration.
16
IN
WLAN
* Fronius Datamanager
= Terminating plug
13
Menu items in the Basic menu
Grid feed-in limit
Field for entering the maximum grid feed-in power in W. If this value is ex-
ceeded, the inverter regulates down to the set value within the time required
by national standards and regulations.
Pulses per kWh
Field for entering the pulses per kWh of the S0 meter.
1
2
*
IN
OUT
OUT
°C
Explanation of the multifunction current interface
on page 45.
Sensor Box
3
IN
OUT
OUT
IN
m/s
W/m²
Advertenties
Hoofdstukken
Inhoudsopgave
