Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8. Before first use
When the heating appliance is used for the very first time, it must first dry out completely. For this purpose,
heat it for one hour with a small quantity of fuel.
During this phase, a slight odour may be given off due to the curing of the primer used.
Keep an eye on the appliance during this phase and immediately remove any water formed by
condensation, before it can burn into the enamel or the lacquer.
9. The controls
•
Adjustment of the feet
In order to make levelling of the appliance possible, the feet on both sides have small setscrews that can be
adjusted separately.
•
Opening of the fire door
55
All manuals and user guides at all-guides.com
(4) Before putting the top plate back you must
remove the second blanking plate. Then screw
the back protection plate back onto the stove.
The control handle is inserted horizontally in the centre of
the door, in the groove between the left side wall and the
door.
Advertenties
Hoofdstukken
Inhoudsopgave
