Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ADF-710 | ENGLISH
Open the battery compartment and insert the
supplied rechargeable batteries (type AAA
NiMH) into the battery compartment with the
correct polarity. Close the battery compart-
ment and then place the indoor unit in the
charging stand. The LED on the charging base
changes to red to indicate that charging is in
progress. When charging is complete, the LED
changes back to green.
Use the ON/OFF switch (7) to switch the indoor
unit ON or OFF accordingly.
SETTINGS
GB
Pairing - How to pair indoor and outdoor unit
NOTE: All units must be switched on and
powered.
1. Press and hold the volume button - (9) on
2. Press the bell button (13) on the outdoor
3. If the pairing is successful, the pairing mode
Adding an additional indoor/outdoor unit
A total of two indoor and two outdoor units can
be paired together. If another unit is to be
added, repeat steps 1-3 with the second indoor/
outdoor unit.
Notes:
• If a third indoor or outdoor unit is paired, the
unit that was paired first is removed from the
system.
the indoor unit until the talk button flashes
blue. 2.
unit. Then press the pairing button (16)
with e.g. a bent paper clip.
is automatically exited and the LED
indicators go out.
28
Advertenties
Inhoudsopgave
