Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ADF-710 | ENGLISH
MOUNTING (OUTDOOR UNIT)
Before mounting, please check whether the
radio range between outdoor and indoor
unit meets your requirements.
The outdoor unit is designed for surface
mounting.
On the back is the suspension (17),
consisting of a slotted hole at the top
and a hole in the battery compartment.
Mark the two holes at the mounting
location.
GB
To transfer the holes, stick a strip of
adhesive tape to the rear housing so that
both holes are covered and trace the holes
with a suitable pen. Remove the tape and
use it as a drilling template.
Depending on the surface, use the screws
supplied with or without dowels.
Screw the screw for the upper suspension
into the wall so that there is approx. 3mm
space between the wall and the screw head.
Remove the front cover of the outdoor unit
by unscrewing the front cover screw (15)
and pulling the front cover forward and
open the battery compartment.
Then hang the outdoor station on the
screw and fix it with another screw through
the hole in the battery compartment.
Reassemble the outdoor station in reverse
order.
26
Advertenties
Inhoudsopgave
