Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Hold the spray gun with both hands. Direct the water jet to the object to be
cleaned and squeeze the trigger.
Let go of the trigger of the spray gun, the water jet will stop and the machine
will switch off. Lock the trigger of the spray gun.
During longer breaks (longer than 5 minutes) switch off the machine using the
ON/OFF switch.
What out for the kickback when squeezing the trigger!
Due to the automatic start/stop mechanism, the motor works only with
a squeezed trigger.
Working with cleaning agents
Attention: The cleaning agent can be added only when
the machine is used at a low-pressure mode.
Pull the pointed/flat jet head forwards.
Attention: When using a cleaning agent, you must
observe the data safety sheets of the
manufacturer of the cleaning agent, especially
the instructions regarding personal protection
equipment.
Attention: Use only a cleaning agent specifically suitable
for high-pressure cleaners.
Remove the cap of the cleaning agent that you will use.
Remove the cap of the tank for the cleaning agent in the machine.
Fill the tank with the cleaning agent.
Reinsert the hose and return the cap.
Spray a bit of cleaning agent on the dry surface; let it react, but not dry.
Using the cleaning agent button, you can control the quantity of additional
cleaning agent.
Spray off the loose dirt with high pressure.
Switching off
Let go of the trigger of the spray gun.
Turn off the machine switch using the OFF/ON switch.
Close the water supply.
Let any pressure escape by squeezing the trigger
until no water comes out of the nozzle.
Take the plug out of the socket.
Attention: When disconnecting the high-pressure hose,
warm water may leak out.
Storage and transport
Place the machine on a solid, even and horizontal surface.
40
Advertenties
Inhoudsopgave
