Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Starting
Place the high-pressure cleaner on a solid, even and horizontal surface.
Insert the plug into the socket.
Do not mount the spray lance!
Before use, de-aerate the machine as follows:
-
Turn the switch to ON.
-
Unlock the trigger of the spray gun.
-
Squeeze the trigger of the spray gun to start the machine.
-
Let the machine run (max. 2 minutes) until the water comes out of the
spray gun without bubbles.
-
Let go of the trigger of the spray gun.
-
Lock the trigger of the spray gun.
Operation
Attention: Letting the high-pressure cleaner run dry for more than 2 minutes
damages the high-pressure pump. If the machine does not build up
pressure within 2 minutes, switch off the machine and follow
instructions in the Problems & Solutions chapter.
Attention: When using the jet, maintain a distance of at least 30cm for cleaning
painted surfaces in order to prevent damage.
Attention: Make sure that the ON/OFF switch is on OFF and insert the plug into a
correctly installed socket.
Attention: The high-pressure cleaner must be used on a safe and stable surface in
a standing upright position (see illustration).
Connect the machine to the electricity and water supply as described.
Open the water supply.
Hold the spray gun with both hands.
Direct the mouthpiece of the selected accessory
(pointed/flat jet, rotary dust-mill or perhaps the
terrace cleaner) away from you to the surface
to be cleaned.
Squeeze the trigger until a constant quantity of
water streams through the spray mouth, so that
the air in the hose can escape.
Let go of the handgrip.
Turn the switch to "ON".
39
Advertenties
Inhoudsopgave
