Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Speed level 2 indicator and Wi-Fi indicator will light up.
Touch the timer key to enable 'Connection Setup Mode'. Speed level 2 indicator will flash.
This mode will be disabled automatically after 5 minutes.
Follow the instructions of the ConnectLife-app.
Pairing Mode
When the process was successful and you want to pair another user, you can use the "Pairing mode"
of the Wi-Fi menu and the "Pairing" or "Discovery" option of the ConnectLife-app. In the
ConnectLife-app, select option 'Add Appliance' and follow the instructions.
Touch the timer key to enable 'Pairing mode'. The speed level 3 indicator will flash.
This mode will be disabled automatically after 3 minutes.
On the ConnectLife-app, use the 'Pairing' or 'Discovery' option of the ConnectLife app to pair
another user.
Remote control mode switch on and off
To be able to change function settings remotely, the appliance must be switched on and the
ConnectLife-app must be enabled. Speed level 4 indicator and Wi-Fi indicator will lit static.
Remote control mode is only available if the Wi-Fi connectivity setup has been performed. Touch
the timer key to enable 'Remote control'.
Speed level 4 indicator is blinking: Remote control is enabled.
Speed level 4 indicator lit static: Remote control is disabled.
To close the Wi-Fi menu, touch and hold the light key for 3 seconds. If no key is touched within 10
minutes, the Wi-Fi menu will be switched off automatically, the hood will be back in standby mode.
Wi-Fi-connectivity
15
Advertenties
Hoofdstukken
Inhoudsopgave
