Advertenties
Beschikbare talen
Beschikbare talen
Wi-Fi-connectivity
First steps to set up the Wi-Fi connectivity:
1. Check the "Requirements" as described above.
2. The hood and lights must be switched off.
3. Touch and hold simultaneously the – (minus) key and the + (plus) key for 3 seconds. All the
indicators on the hood and remote will blink.
4. Press any key to enter the Wi-Fi configuration menu. Speed levels 2, 3 and 4 indicators light up.
5. Touch the – (minus) key to turn on Wi-Fi. The Wi-Fi indicator will turn on and speed level 2 and
3 indicators will blink 3 times.
6. After 3 seconds it will return to the Wi-Fi-menu.
7. Touch the + (plus) key to enter the connection menu. Confirm with the timer key to start the
'Connection menu'. Speed level 2 indicator and Wi-Fi indicator will blink during the connection
time. This mode will be disabled automatically after 5 minutes.
8. Start the ConnectLife-app and follow the instructions in the app.
9. If the ConnectLife-app does not connect to the device, wait 10 minutes and repeat the steps
described or to leave the Wi-Fi menu touch and hold the light key for 3 seconds.
INFORMATION!
Troubleshoot quickly by turning the Wi-Fi module off and on again. You can find more help in the
"Wi-Fi troubleshooting" section.
Depending on the Wi-Fi state, there are 1 to 3 options available in the menu:
The Connection Setup Mode
The Pairing Mode
Remote control mode
If more than 1 option is available then use the + (plus) and - (minus) keys to toggle between the
options.
Connection Setup Mode
The appliance must be connected to the Cloud for the application to monitor and control the
appliance remotely.
14
Advertenties
