Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en
Dispensing hot water
F
If coffee is not dispensed within
90 seconds, the brewing chamber
empties automatically to avoid an
overflow� The appliance is then
rinsed�
■ Place a cup underneath the beverage
outlet�
■ Using the rotary selector, select a coffee
drink or a coffee drink with milk.
The display shows the selected drink along
with the preset values for this drink�
F
The settings can be changed
as described in the section
"Drink adjustment"�
For coffee drinks with milk, please
observe the instructions in the
section "Preparation using milk"�
■ Press C to start dispensing�
The coffee is brewed and then dispensed
into the cup. When selecting coffee drinks
with milk, the milk is first dispensed and
then the coffee brewed.
F
For another drink with ground coffee,
repeat the procedure�
Dispensing hot water
B
Risk of burns!
The beverage outlet gets very hot�
After use, always let it cool down
before you touch it�
The appliance must be ready for use�
■ Remove the milk tube from the milk
container�
■ Remove any milk or coffee residue from
the outlet�
■ Place a cup or glass underneath the
beverage outlet�
■ Select "Hot water" with the rotary
selector�
F
The settings can be changed
as described in the section
"Drink adjustment"�
■ Press C to start dispensing�
■ The message appears "Milk tube
removed from milk container?"�
44
■ If still connected, remove the milk tube
and touch [ Yes ] on the display�
Hot water flows out of the beverage outlet.
Press button C again to stop the
procedure prematurely�
Personalised drinks
Press B to open the selection for per-
sonalised drinks�
Up to 8 storage spaces can be used� Save
your favourite drinks that are frequently
dispensed here with all their settings�
F
Press B to exit the menu
without saving at any time�
Entering or changing drinks
■ Press B�
The selection of memory locations appears�
myCoffee 1
■ Using the rotary selector, choose an
empty memory location (empty cup)
to make a new entry, or an occupied
memory location to change or delete a
favourite drink�
■ At an empty memory location
[ Create beverage ] or an occupied
memory location [ Change beverage ]�
F
If [ Delete beverage ] is selected, the
settings for the memory location are
deleted and it is again empty�
The menu for adjusting the drinks opens�
The last drink dispensed is shown with the
last settings selected�
■ If you do not wish to save last drink
dispensed, select another drink with the
rotary selector�
■ Touch each setting to be changed and
adjust the values as desired with the
rotary selector�
Other setting options appear depending on
the selection�
Create beverage
Advertenties
Hoofdstukken
Inhoudsopgave
