Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 11:
Installation of weight cover (16).
1. Insert the weight cover holder (28) into ends of weight covers
(16). Place the weight cover (16) to top and bottom cover bracket
(22+82) and fix each weight cover end with cable ties (61).
2. Use the butterfly nut (33) to adjust the tightness of cover (16)
so that the weight don't touch the cover during Lift up and down.
Turn clockwise to tighten and turn anticlockwise for loosen the
weight cover.
Step 12:
Checks:
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. Before starting training, ensure that the recommended safety
clearances are maintained to other objects.
3. When using the machine, always be sure to wear suitable
headwear and clothes. This must protect against catching hair or
clothing and trapping hair or clothing in the moving parts of the
machine.
4. When everything is in order, familiarise yourself with the machine
with light weights. The weights have to secure with security pin (30).
Maximum load of weight: 67Kg.
Note: Depends on exercising you can use latissimus bar (15) instead
of curl bar (12) at both cable connections points.
25
Advertenties
Hoofdstukken
Inhoudsopgave
