Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Hanging on a frame (e.g. a tent frame)
Make sure that the party-tent heater can hang freely from the
attachment point you have selected and that it is sufficiently sturdy
to bear the weight of the heater. Secure it properly so that it cannot
sag, slide or move in any other way.
Seek a location in the frame that fulfils all of the requirements;
Use the extra attachment chain with a karabiner hook at each
end to secure effectively:
- Hook the security chain to the ring on the hanging chain that is
attached to the party-tent heater, using the karabiner hook;
- Wind the security chain around the frame once or twice;
- Then attach the second karabiner hook also to the ring at the
hanging chain; this will ensure that the party-tent heater
remains 40 cm from the frame.
Check that the karabiner hook is closed properly and that the
party-tent heater is securely attached. It should not slide, sag or
move at all!
The party- tent heater's upper decorative cover
Take care!
must be positioned at least 40 cm from the tent
canvas, cover or any other item!
The following applies to both methods:
Run the electrical cable along the
hanging chain and secure at
multiple points with a tie-wrap. The
first tie-wrap must be secured to
the third link as the first few links
become hot. Make sure that the
cable is tight along the chain but
do not hang the device on the
cable! Run the electrical cable from
20
Advertenties
Inhoudsopgave
