Inhoudsopgave
Advertenties
MasoSine SPS sinuspompen Gebruikershandleiding
2 Inbouwverklaring
in accordance with Annex II B for machines to be incorporated
The manufacturer:
herewith declares that the following partly completed machine:
Name
Type
complies with the following essential requirements of the Machinery Directive (2006/42/EC).
Harmonised EN standards used:
EN ISO 12100, 1-2
97/23/EG
EN 60204-1
National technical standards, guidelines and specifications used:
EN 809
DIN 31000/A1
DIN 11850
DIN 11851
The original version of the operating instructions for this incomplete machine is available.
The incomplete machine may not be put into service until the machine / plant into which the incomplete machine is to be
incorporated has been declared in conformity with the provisions of the Machinery Directive (2006/42/EC).
The manufacturer undertakes to provide national authorities with relevant documentation on the incomplete machine by
electronic means on request.
The relevant technical documentation belonging to the machine according to Annex VII Part B has been prepared.
The person responsible for the documentation was Bernd Wetzel, Tel.: +49(0)7062 9560-17
Ilsfeld, 01.01.2016
Place, Date
Op het moment van publicatie wordt aangenomen dat de informatie in deze
handleiding correct is. MasoSine Process Pumps aanvaardt echter geen enkele
aansprakelijkheid voor fouten of weglatingen. Het beleid van MasoSine Process
Pumps is gericht op continue verbetering en het bedrijf behoudt zich het recht voor
specificaties zonder vooraankondiging te wijzigen. Deze handleiding is uitsluitend
bedoeld voor gebruik met de pomp waarmee zij werd verstrekt. Eerdere of latere
modellen kunnen afwijken. De meest recente versies van de handleidingen worden
gepubliceerd op de MasoSine-website:
http://www.masosine.de
EC DECLARATION OF INCORPORATION
as defined by the EC Machinery Directive 2006/42/EC,
Watson-Marlow GmbH MasoSine
Postfach 100
D-74358 Ilsfeld (Germany)
Tel.: +49(0)7062 9560-0
: MasoSine Pump
: SPS
: Safety of machinery
: Pressure Equipment Directive
: Electrical equipment for industrial machines
: Pumps and pump units for liquids - Common safety requirements
: General principles for the safe design of technical products
: Stainless steel tubes for food and chemical
: Fittings for food, chemical and pharmaceutical industry - pipe fittings of stainless steel -
Design for rolling and welding
_______________________
(GM) Ulrich Fromm
3
Advertenties
Inhoudsopgave
