Usage Instructions; Control Panel - Bestway LAY-Z-SPA Gebruikershandleiding
Verberg thumbnails
Zie ook voor LAY-Z-SPA:
- Handleiding (340 pagina's) ,
- Handleiding (28 pagina's) ,
- Handleiding (25 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USAGE INSTRUCTIONS
CONTROL PANEL
ON/OFF BUTTON: After activating the RCD/PRCD, press and hold the
The
button will light up green and the control panel can now be used. Press and hold the
button for 2 seconds to turn off all activated functions.
CELSIUS/FAHRENHEIT TOGGLE: The temperature can be displayed in either
Fahrenheit or Celsius.
LOCK/UNLOCK BUTTON: To lock or unlock the pump, press this button for 2 seconds.
The pump also has a 5-minute auto-lock, and this light will turn on.
POWER-SAVING TIMER BUTTON: Helps to avoid wasting power by setting the time and duration
of the heating cycle for the hot tub. Follow these steps to activate the POWER-SAVING function:
Press the
Press the
Press the
After setting the heating time, the
Press the
of the heating function. If the timer is set to 0 hours, the heating system will activate immediately.
Press the
LED turns on, and the timer for the activation of the heating function begins. The screen flashes
the current temperature and time alternately.
To modify the timer settings, press the
To cancel the settings, hold the
When the POWER-SAVING function is activated, all other control panel functions (massage,
filtration) except the heating function can be used.
The POWER-SAVING function is not an automatic function. After one complete cycle (timer and
heating duration), this function must be set again.
HEAT BUTTON: Press the
button is red, the heating system is activated. When the light is green, the water has reached
the set temperature.
If the heating system is activated, the filtration system will automatically start.
After turning off the heating system, the filtration system will continue to operate.
TEMPERATURE ADJUSTMENT BUTTONS: Pressing the
display, which will flash, showing the set temperature for 3 seconds. After that it will show the
actual water temperature. Adjust the set temperature using the
The default set temperature is 35°C (95°F).
Temperature adjustments range from 20°C (68°F) to 40°C (104°F).
AIRJET
button and the
LED starts to flash.
or
button to adjust the heating time (1-999 hours).
button again to confirm the heating time.
or
button to set the timer (0-999 hours). This is the amount of time before the activation
button again or simply touch nothing for 10 seconds to confirm the setting. The
button to activate the heating system. When the light of the
AIRJET WITH WI-FI
LED starts to flash.
button and use the
button for 2 seconds.
13
button for 2 seconds.
or
button to adjust.
or
buttons will activate the
or
button.
Advertenties
Inhoudsopgave
