Warnings - Only For Spa Equipped With Wi-Fi; Spa Heater Equipotential Bonding Terminal - Bestway LAY-Z-SPA Gebruikershandleiding
Verberg thumbnails
Zie ook voor LAY-Z-SPA:
- Handleiding (340 pagina's) ,
- Handleiding (28 pagina's) ,
- Handleiding (25 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SAFETY INFORMATION
• When the spa is being used, the cover should be placed in a clean, dry area, otherwise it can pick up
dirt and bacteria. Covers should not be put on wooden tables or wooden decking because of the risk of
bleaching the wood. A cover lifter, or similar device, is useful for ensuring that the cover does not come
into contact with the ground. A cover lifter is strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural engineer to verify if the support material is
strong enough to support the maximum design load of the spa, spa water and bathers. Read the filled
weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: WIFI: 2412~2472MHz; BLE: 2402~2480MHz
• Transmitter maximum output power: WIFI:19dBm; BLE:10dBm
DISPOSAL
Electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for recycling advice.
TECHNICAL SAFETY INSTRUCTION
PRCD
• Before inserting plug into a power outlet, make sure the current rate of the power outlet is suitable for
the pump.
• The spa is a class I electrical appliance and must be connected directly to a grounded socket. It is
recommended to only use a socket which is resistant to humidity and capable of high-power loading.
Regularly check the plug and socket for signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the quality of the electrical supply, please
consult a qualified electrician before use.
• The PRCD plug must be tested before each use to avoid risk of electric shock.
• Do not use the pump if this test fails. For assistance, please visit the support section on our website,
www.bestwaycorp.com.
SPA HEATER EQUIPOTENTIAL BONDING TERMINAL
• It is recommended to arrange for a qualified electrician to connect the spa pump to an equipotential
bonding terminal using a minimum 2.5mm
SAVE THESE INSTRUCTIONS
solid copper conductor.
2
10
Advertenties
Inhoudsopgave
