Advertenties
Routing direction and routing process (see figures F–G)
Routing must always be carried out with the work-
u
piece being moved against the direction in which the
router bit (17) is turning (up cut). If the workpiece is
moved in the same direction as the router bit is turning
(down cut), the power tool may be pulled out of your
hands.
Note: Be aware that the router bit (17) always protrudes
slightly from the base plate (12). Do not damage the tem-
plate or the workpiece.
Set the routing depth you want.
Switch on the power tool and guide it to the point you want
to machine.
Carry out the routing process with a uniform feed.
Switch off the power tool after routing.
Do not put the power tool down before the router bit
u
has come to a complete stop. Application tools that are
still running can cause injuries.
Edge or profile routing (see figure H)
For edge and profile routing without a parallel guide, the
router bit must be fitted with a pilot pin or a ball bearing.
While it is switched on, guide the power tool towards the
workpiece from the side until the pilot pin or the ball bearing
of the router bit is touching the side of the workpiece edge
that you want to machine.
Guide the power tool along the workpiece edge. Pay atten-
tion that the router is positioned perpendicularly. Too much
pressure can damage the edge of the workpiece.
The following maximum workpiece dimensions apply for
edge and profile milling operations:
Material
Hardwood
Softwood
Plastic
MDF sheets
Plywood sheets
Maintenance and Service
Maintenance and Cleaning
Before carrying out any work on the power tool (e.g.
u
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
Clean the power tool with a vacuum cleaner, paint brush or
hand brush after use. Ensure that the guide columns are free
of wood dust. Apply a drop of lubricant to the smooth guide
column (19) (see figure I).
Bosch Power Tools
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When the batteries are shipped by third parties (e.g. air
Radius
Chamfer
transport or forwarding agency), special requirements on
mm
mm
packaging and labelling (e.g. ADR regulations) must be met.
10
6
A dangerous goods expert must be consulted when prepar-
ing the items for shipping.
12
10
Dispatch battery packs only when the housing is undam-
12
10
aged. Tape or mask off open contacts and pack up the bat-
12
10
tery in such a manner that it cannot move around in the
10
6
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Only for EU countries:
Power tools that are no longer suitable for use and defective
or used batteries must be disposed of separately. Use the
designated collection systems.
Power tools, rechargeable batteries, accessor-
ies and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
1 609 92A A2N | (12.08.2024)
English | 17
Advertenties
