Inhoudsopgave
Advertenties
NOTE: When using sanding sheets without ventilation holes, dust
extraction is not possible.
NOTE: Empty the dust collection box or the vacuum cleaner regularly in
order to en- sure optimal suction power.
7.7
Connecting dust extraction (Fig. 8)
▪
Remove the dust collection box (4), see described above
▪
Try connecting the external suction hose (not included) directly to the dust extraction
connection.
▪
If this does not succeed, insert the adaptor for vacuum cleaner (5) into the connection for
dust extraction. Connect the external suction hose to the adaptor for vacuum cleaner (5).
▪
The adaptor for vacuum cleaner (5) and the external suction hose, can be easily pulled off
the connection for dust extraction.
NOTE: Make sure that the vacuum cleaner is suitable, e.g. workshop
vacuum cleaner. Normal household vacuum cleaners are not suitable for
vacuuming sanding material. This information can be found in the operating
instructions of the external device.
8 TECHNICAL DATA
Rated Voltage
Rated Frequency
Rated Power
Rotation speed
Cable length
Sanding surface, rectangular
Sanding surface, triangular
Sanding surface, round
Sanding surface, cylindrical-type plate
Sanding surface, finger-type plate
Carbon brush motor
Oscillation speed
Soft grip
Hook&loop system
Self dust function
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
Copyright © 2024 VARO
POWXBOX026
230V
50Hz
200W
7000–12000min
2m
184x92mm
144x144x98mm
Ø 122mm
53x38mm
92x30mm
Yes
14000–24000min
Yes
Yes
Yes
90dB(A)
98 dB(A)
12,9 m/s²
P a g e
| 8
-1
-1
K = 1.5 m/s²
www.varo.com
EN
Advertenties
Hoofdstukken
Inhoudsopgave
