Switching The Appliance On; Operating Tips - Siemens GS N Series Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor GS N Series:
- Gebruiksaanwijzing (116 pagina's) ,
- Gebruiksaanwijzing (97 pagina's) ,
- Gebruiksaanwijzing (116 pagina's)
Inhoudsopgave
Advertenties
en
Controls
Fig. 2
On/Off button
1
Serves to switch the whole
appliance on and off.
2
Temperature selection button
The required temperature is set
with this button.
3
Temperature display
Indicates the set temperature of
the freezer compartment.
Alarm button
4
Used to switch off the warning
signal, see chapter "Alarm
function".
5
"super" button
Serves to switch the "super"
freezing function on and off (see
chapter entitled "Super freezing").
26
Switching
the appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
A warning signal sounds.
The temperature display 3 flashes
and the alarm button 4 is lit.
Press the alarm button 4. The warning
signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 3 is lit.
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperature has been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Advertenties
Inhoudsopgave
