Inhoudsopgave
Advertenties
10. Maintenance and care
Attention: Disconnect the device from the com-
pressed air supply before carrying out maintenance
and cleaning work.
Compliance with the maintenance notes specified here
ensures a long service life and trouble-free operation
for this quality product.
Before starting work, always check that the magazine
(6) is firmly seated. Clean the device thoroughly and
immediately after work.
Regular lubrication is a prerequisite for your product
to function properly over the long term. Only use the
oil included in the scope of delivery for this purpose.
If the compressed air universal tool is out of operation
for several days, you must put 5-10 droplets of oil in-
to the compressed air supply before switching it on.
Only store your compressed air tool in dry rooms.
There are two lubrication options:
via a misting lubricator
A complete maintenance unit includes a mist lubricator
and is attached to the compressor.
manually
If your system has neither a maintenance unit nor a
line lubricator, 3-5 droplets of oil must be added to
the compressed air supply before each start-up of the
compressed air universal tool.
Other maintenance
The device has no further internal parts that require
maintenance.
11. Repair & ordering spare parts
After repairs or maintenance, make sure that all safe-
ty-related parts are installed and are in perfect condi-
tion.
All parts which may cause injury must be kept where
they are inaccessible to children or others.
Attention: According to the German Product Liability
Act, no liability is accepted for damage caused by im-
proper repairs or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialist. The same applies to
accessory parts.
24 | GB
11.1 Ordering spare parts
Please provide the following information when order-
ing spare parts:
• Model designation
• Item number
• Type plate data
Spare parts / accessories
Clamps (500 pcs.) 16mm Item no.:
Clamps (500 pcs.) 40mm Item no.:
Clamps (500 pcs.) 25mm Item no.:
Nails (500pcs) 15mm Item no.:
Nails (500pcs) 25mm Item no.:
Nails (500pcs) 50mm Item no.:
11.2 Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Pressure spring
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
12. Cleaning
Air nail gun
• Do not use sharp objects to clean the device. No
liquids must be allowed to enter the interior of the
device. Otherwise, the device could be damaged.
• Clean the device regularly, preferably always imme-
diately after finishing work.
• Clean the housing with a dry cloth – never use pet-
rol, solvents or cleaners that attack plastic.
• After each use, pack the air nail gun in the carrying
case provided to protect it against soiling.
13. Disposal and recycling
Notes for packaging
www.scheppach.com
7906100854
7906100855
7906100856
7906100857
7906100858
7906100860
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
Advertenties
Hoofdstukken
Inhoudsopgave
