Inhoudsopgave
Advertenties
• Always wear shock-resistant eye protection with
side shields while operating the device.
• The risk to others must be assessed by the user.
• Be careful with devices without workpiece contact,
as they can trip unintentionally and injure the user
and/or third parties.
• Ensure that the device is always securely seated on
the workpiece and cannot slip away.
Operational hazards
• Hold the device properly to be able to react to nor-
mal or sudden movements, such as recoil.
• Keep a firm footing and keep your balance at all
times.
• Use suitable body protection equipment for your
personal protection, such as hearing and eye pro-
tection. Wearing personal protective equipment,
such as dust masks, anti-slip safety shoes, safe-
ty helmet or hearing protection, depending on the
type and use of the driving-in device, reduces the
risk of injuries.
• When working, hold the driving-in device in such
a way that the head and body cannot be injured in
the event of a possible recoil due to a power supply
incident or hard spots in the workpiece.
• Never trigger the driving-in device into empty space.
In this way, you avoid hazards from free-flying driv-
en-in fasteners and overstressing of the device.
• When transporting, disconnect the power tool from
the compressed air supply, especially when using
ladders or moving in an unaccustomed position.
• At the workplace, only carry the single-action tool
by the handle and not with the trigger actuated.
• Pay attention to the workplace conditions. Driven-in
fasteners can potentially penetrate thin workpieces
or slide off workpieces when working on corners
and edges, thereby endangering persons.
Hazards due to repetitive movements
When using the driving-in device for long periods of
time, the user may experience discomfort in the fol-
lowing areas
hands, arms, shoulders, the neck or other parts of
the body.
• When using the driving-in device for long periods
of time, the user may experience discomfort in the
hands, arms, shoulders, neck or other parts of the
body.
20 | GB
• When using the machine, the user should maintain
a comfortable posture, taking care to stand securely
and avoiding awkward postures or those where it is
difficult to maintain balance. The user should change
posture in the course of prolonged work, which can
be helpful in avoiding discomfort and fatigue.
• If the user experiences symptoms such as per-
sistent or recurring discomfort, pain, palpitations,
aching spots, tingling, numbness, burning sensa-
tion or stiffness, these warning signs should not
be ignored. The user must consult a qualified oc-
cupational health professional regarding general
activities.
Hazards due to accessories and consumables
• Disconnect the device from the compressed air
supply before changing accessories or making ad-
justments.
• Only use accessories and consumables of the siz-
es and types recommended by the manufacturer
of the air nail gun.
Hazards in the workplace
• Slips, trips and falls are major causes of work-
place accidents. Pay attention to slippery surfaces
caused by the use of the device and also to tripping
hazards caused by the air pressure hose.
• Extra caution should be exercised in unknown en-
vironments. There may be hidden hazards, such as
electrical cables or other supply lines.
• This device is not intended for use in hazardous ar-
eas and is not insulated against contact with elec-
trical energy.
• Ensure that there are no electrical cables, gas
pipes, etc. that could cause a hazard if damaged
by the device.
Hazards due to dust and exhaust gases
• If the device is used in an area where static dust is
present, it may swirl up the dust, causing a hazard.
• The air nail gun shall be operated and maintained
in accordance with the recommendations contained
in this manual to minimise the release of dust and
vapours.
• The exhaust air must be discharged in such a way
that the whirling up of dust in a dust-filled environ-
ment is reduced to a minimum.
• All installation/accessory parts of the device intend-
ed to collect, extract or suppress flying dust or va-
pours should be used and maintained in accord-
ance with the manufacturer's instructions.
www.scheppach.com
Advertenties
Hoofdstukken
Inhoudsopgave
