Bestway LAY-Z-SPA Handleiding pagina 12
Verberg thumbnails
Zie ook voor LAY-Z-SPA:
- Handleiding (28 pagina's) ,
- Handleiding (16 pagina's) ,
- Handleiding (340 pagina's)
Advertenties
MAINTENANCE INSTRUCTIONS
Parameters
Water clarity
Colour of the water
Turbidity in FNU/NTU
Nitrate concentration above that of fill water in mg/l
Total organic carbon (TOC) in mg/l
Redox potential against Ag/AgCI 3,5 m KCl in mV
pH value
Free active chlorine (without cyanuric acid) in mg/l
Free chlorine used in combination with cyanuric acid in mg/l
Cyanuric acid in mg/l
Combined chlorine in mg/l
Please consult your local bath or chemical supply retailer for more information about chemical maintenance. Pay close attention to the
chemical manufacturer's instructions.
Ongoing Bath Maintenance:
For liner maintenance, refer to the illustration steps inside the manual.
When the bath is being used, the cover should be placed in a clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden decking because of the risk of bleaching the wood. Covers must be cleaned
inside and out periodically using a suitable solution that includes adequate disinfection.
A cover lifter, or similar device, is useful for ensuring that the cover does not come into contact with the ground. A cover lifter is
strongly recommended for baths in rental settings.
In the event of a leak, you can find the instructions in the FAQs on the support section of our website
(www.bestwaycorp.com/support).
Filter Pump Maintenance:
For maintenance instructions, refer to the illustration steps inside the manual.
reflect actual product. Not to scale.
The filter pump can only run when the ambient temperature is above 10°C / 50ºF.
The filter pump can only run when the water temperature is above 5°C / 41ºF.
Make sure that the filter pump is unplugged before any maintenance.
To optimize the Filter Pump performance and for sanitary reasons, we suggest replacing the filter cartridge with a new one
every two weeks.
DISASSEMBLY & STORAGE INSTRUCTIONS
Draining:
For draining, refer to the illustration steps inside the manual.
product. Not to scale.
IMPORTANT: Before draining the bath, make sure to manually remove any remaining ice from the bath. Avoid turning the bath upside
down, which can damage the liner or cause injury to your hands due to the heavy weight.
Cleaning:
1. Rinse the bath liner with tap water to remove any residue left by chemicals or debris.
Do not clean the bath with strong bleach-based detergents to avoid degrading the material.
2. Leave the flattened liner in the sunlight until it's completely dry.
3. To remove the remaining water completely, wipe the bath liner with a dry cloth.
Storage:
Remove all accessories. Be sure that bath liner and accessories are completely clean and dry before storage. If the bath is not
completely dry, mold may result and will damage the bath liner during the storage period.
Once the bath is completely dry, sprinkle with talcum powder to prevent the liner from sticking together. We strongly recommend
disassembling the bath when the ambient temperature is above 15ºC / 59ºF.
Before storage, remove and dispose of the filter cartridge.
Fold the bath liner only if the ambient temperature is above 15ºC / 59ºF. Store the bath in a dry place with a moderate temperature
between 15ºC / 59ºF and 38ºC / 100ºF and keep the bath liner and all accessories inside a cardboard box to better protect the PVC
material during the winter period.
WARRANTY TERMS
For support and product registration, please visit bestwaycorp.com/support.
Values
clear view of the bath bottom
no colour should be observed
max. 1,5 (preferably less than 0,5)
max. 20
max. 4,0
min. 650
6,8 to 7,6
0,3 to 1,5
1,0 to 3,0
max. 100
max. 0,5 (preferably close to 0,0 mg/l)
Drawings are for illustration purposes only. May not
Drawings are for illustration purposes only. May not reflect actual
12
Advertenties
