Inhoudsopgave
Advertenties
Note:
Please use AC power cord as main power when upgrading software.
Do not switch off the power to the radio until the update operation is
complete and the radio has restarted, otherwise the unit may become
permanently damaged.
Software version
The software display cannot be altered and is just for your reference.
1. With your radio switched on, press and hold the Info / Menu button to
access the menu for the current mode.
2. Rotate the Tuning control knob to select "System Setting" and press
the Tuning control knob to enter the system settings menu.
3. Rotate the Tuning control knob until "SW Version" appears on the
display and press the Tuning control knob. The software version
shows on the display.
4. Press and release the Info / Menu button to exit the software version
display.
Auxiliary input socket
The 3.5mm Aux In socket is to connect audio source like MP3 player or
CD walkman and listen the audio program via radio speaker.
1. Connect a stereo or mono audio source (like CD walkman or MP3
player) to the Aux In socket, which is located on the side, behind the
rubber cover.
2. Press the Source button to select Auxiliary Input mode. The display
will show Auxiliary Input.
3. Play the file in the CD walkman or MP3 player.
4. Adjust the volume control to the required level.
20
Note:
Make sure the rubber cover of the Aux In socket is closed well after use
to prevent moist and dirt from entering the radio.
Never use the Aux In socket in rainy or moist conditions to prevent
moist from entering the radio. Keep the rubber cover always closed
under these conditions.
WARRANTY
This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has
been opened or any modifications or alterations to the radio have
been made !
The terms of the warranty of this radio do not cover the following:
− D amage caused by misuse, abuse, neglect, alterations, accidents or
unauthorized repair.
− Normal wear and tear.
− B atteries.
Never open the device casing. The manufacturer will not accept any
liability for damage resulting from improper handling. The type plate is
located on the back of the device.
Advertenties
Hoofdstukken
Inhoudsopgave
