Inhoudsopgave
Advertenties
Preset stations in DAB and FM mode
There are 5 memory presets for each DAB / FM wavebands.
1. Press the Power On / Off button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button until the display shows e.g.
"Preset 2 stored". The station will be stored under the chosen preset
button. The corresponding preset number e.g."P2" will show on the
display. Repeat this procedure for the remaining presets.
4. Station stored in the memories may be over written by following the
above procedure.
Recall a preset in DAB and FM mode
1. Press the Power On / Off button to turn on the radio.
2. Press the Source button to select the required waveband.
3. Momentarily press the required Preset button, the preset number and
station will appear in the display.
Note:
The display will show "Preset Empty" if no station has been stored to
that preset.
Listening to music via Bluetooth streaming
You need to pair your Bluetooth device with your radio before you can
auto-link to play stream Bluetooth music through your radio. Pairing
creates a "bond" so two devices can recognize each other.
Pairing and playing your Bluetooth device for the first time
1. Press the Source button to select Bluetooth function. The "Bluetooth
14
Pairing" will show on the display.
2. Activate Bluetooth on your device according to the device's user
manual to link to the radio. Locate the Bluetooth device list and
select the device named "DABBOX 3" (With some Smartphone's
that are equipped with earlier versions than BT2.1 Bluetooth device,
you may need to input the pass code "0000").
3. Once connected, there will be a confirmation tone sound and the
name of your connected Bluetooth device will show on the display.
You can simply select and play any music from your source device.
The volume control can be adjusted from your source device, or
directly from the radio.
4. Use the controls on your Bluetooth-enabled device or on the radio to
play / pause and navigate tracks.
Note:
1) I f 2 Bluetooth devices are pairing for the first time, both must search
for your radio, it will show its availability on both devices. However,
if one device links with this unit first, then the other Bluetooth device
won't find it on the list.
2) If you take your source device out of range, the connection will be
temporarily disconnected to your radio. Your radio will automatically
reconnect if the source device is brought back in range. Be aware
that during the period of disconnection, no other Bluetooth device
can pair or link with your radio.
3) If "DABBOX 3" shows in your Bluetooth device list but your device
cannot connect with it, please delete the item from your list and
pair the device with the radio again following the steps described
previously.
4) The effective operation range between the system and the paired
device is approximately 10 meters (30 feet). Any obstacle between
the system and the device can reduce the operational range.
Advertenties
Hoofdstukken
Inhoudsopgave
