Inhoudsopgave
Advertenties
10. Troubleshooting
Problem
EN
Little humidification
power.
No humidification
power.
An independent
humidity switch
measures a differ-
ent humidity value
from the display on
the appliance.
The escaping air
smells unpleasantly.
All manuals and user guides at all-guides.com
Possible cause
• The function "LOW" was selected,
using the "SPEED" button.
• The water in the water basin is very
cold.
• The power plug is not connected to
the power outlet or the connection
adapter is not correctly plugged
into the appliance jack.
• The warning light "WATER SHORT-
AGE" has illuminated, then the
appliance and all displays have
turned off.
• Dirt has collected in the air outlet
or inlet opening.
• The appliance is placed near a
window or an open door.
• There is old water in the water
basin.
• Old water was left over in the water
basin and merely mixed with new
water.
94
Solution
• Select a higher humidifica-
tion power, f.e. "MID" or
"HIGH".
• Select the humidification
power "HIGH" with the
"SPEED" button. After 10
minutes, humidification
power will have increased.
• Firmly connect the power
plug to the socket and the
connection adapter to the
appliance jack.
• Fill the water basin up to
the MAX marking with fresh
tap water, then reinstall the
appliance top.
• Clean the air inlet and outlet
openings. NOTE: Even within
one room, different values for
humidity can be measured.
The "CURRENT HUMID-
ITY" value only refers to
the humidity directly by the
appliance.
• Place the appliance in a spot
free of draft.
• Drain the water and clean the
appliance as described in
"Cleaning and maintenance".
Fill the water basin with
fresh tap water.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
