Inhoudsopgave
Advertenties
All manuals and user guides at all-guides.com
6. Operation
If the water basin is filled to the MAX marking (see point 26 on page 71 of this manual) with fresh
tap water and the appliance is correctly assembled and connected to the power, you can start
using it.
1. Switching the appliance on
• Touch the "POWER" button to switch the appliance on. The current humidity will illuminate in
the control panel, also "CURRENT HUMIDITY" and "LOW" for low humidity, "LOW + MID" for
intermediate humidity or "LOW, MID + HIGH" for high humidity.
2. Choosing functions
• Choose the desired functions. Set humidification power with the "SPEED" button. If you wish,
activate the ion, night and light functions. If needed, set the operation time with the "TIMER"
button. The child safety mode can also be activated.
• In general: The higher the room temperature is, the faster the humidification will be.
• NOTE: Should you lift the appliance top and separate it from the water basin, the appli-
ance will automatically stop. Only after the appliance top has been properly replaced on the
water-filled water basin the appliance will reactivate.
• The appliance will also switch off if the water basin is no longer filled with enough water. In
this case, the display (5) illuminates and the appliance switches off.
• Before refilling the appliance with water, please always switch the appliance off with the
"POWER" button (16) and pull the power plug from the power socket resp. the connection
adapter from the appliance jack first. Then, use both hands to lift off the appliance top. Fresh
tap water can now be refilled. Please make sure that the water level does not exceed the MAX
marking (see point 26 on page 71 of this manual).
91
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
