All manuals and user guides at all-guides.com
2. Decalcifying the water basin and the humidification plates
• If the water basin and the humidification plates are calcified, both should be cleaned with a
decalcifying agents, depending on water hardness, this should be done at least once a month,
if the water is very hard even once every two weeks.
• Pour 3 liters of water (approx. 30° C warm) into the water basin and add the decalcifier. Re-
assemble the appliance and let it run for at least one hour in a well ventilated spot (ideally
outside, f.e. on the balcony). The remedy of defects caused by improper decalcifying agents
is excluded from warranty.
• Depending on the limescale deposits it may take longer for all limescale deposits to be re-
moved.
• Afterwards, carefully rinse water basin and humidification plates with water and dry them.
3. Cleaning the appliance top and the water basin outside
• Clean the appliance top and the outside of the water basin regularly with a slightly wet cloth
and a mild detergent.
• In general, do not use any aggressive or abrasive detergents or metal sponges, as these
might damage the surface.
9. Storage
• Check if the appliance is switched off and the power plug is pulled resp. the power cord is
removed. The water has to be drained completely.
• Check if the appliance inside is completely clean and dry. If necessary, let the appliance stand
open until the humidification plates and the water basin are dry on the inside.
• Keep the appliance standing upright in a dry, dark spot, best in the original packaging. Do not
place anything on the appliance.
• Always keep the appliance and power cord out of the reach of children.
93
EN