Inhoudsopgave
Advertenties
PRODUCT CHARACTERISTICS
A mortar mixer is a power tool allowing fast and accurate mixing of mortars, paints, adhesives and other liquid construction
masses. Adjustment of rotational speed and possibility of replacing an agitator allows easy adapting the operating characteristics
to type of mass to be mixed. Correct, reliable and safe operation of the product depends on proper operation, therefore:
Before starting the work with this tool, please read this manual and keep it properly.
The supplier does not assume any liability for damages resulting from failure to follow safety regulations and recommendations
specifi ed in this manual.
PRODUCT ACCESSORIES
The product is supplied as complete, however, prior to work make the assembly described in later part of this manual.
TECHNICAL PARAMETERS
Parameter
Catalogue number
Rated voltage
Rated frequency
Rated power
Insulation class
Rated rpm
Mixer mounting
Max. mixer diameter
Noise level
Acoustic pressure L
pA
Acoustic power L
wA
Vibration level
Protection class
Weight
The declared noise emission values have been measured using the standard test method and can be used to compare one tool
to another. The declared noise emission values can also be used for preliminary exposure assessment.
Warning! Noise emissions during the correct operation of a power tool may diff er from the declared values depending on the
manner in which the tool is used, in particular the type of the workpiece.
Warning! Operator protection measures must be determined based on an approximation of exposure under current conditions of use.
All stages of the work cycle must be taken into account. In addition to the working time, other factors must be taken into account,
such as the time when the tool is switched off and when it is idle.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
power tool increases the risk of electric shock.
O R I G I N A L
10
GB
Measuring unit
[V~]
[Hz]
[W]
[min
]
-1
[mm]
[dB(A)]
[dB(A)]
[m/s
2
]
[kg]
I N S T R U C T I O N S
Value
78855
230
50
850
II
0 - 900
M14
120
87 ± 3
98 ± 3
5,45 ± 1,5
IP20
3,9
Advertenties
Inhoudsopgave
