Inhoudsopgave
Advertenties
en Cleaning and servicing
Press the required programme.
2.
Overview of service programmes
You can find an overview of the service programmes here.
Note: The start image shows the remaining number of beverages that can be
dispensed until running the programme and the duration.
Tips
¡ If you are starting the "Descale" or
"Calc'n Clean" programme, keep a
container with a capacity of min.
0,5 l at the ready.
¡ If you use a water filter, this will
prolong the time until you have to
run a service programme.
¡ You can combine "Descale" and
"Cleaning" with the "Calc'n Clean"
service programme.
64
INTENZA filter
Cleaning milk system
Calc'n Clean
Cleaning
Descale
Frost protection
Cleaning brewing unit The display shows optimum cleaning
Cleaning beverage
system
Special rinsing
a Display indicates progress
of the programme.
Insert, replace or remove the water fil-
ter.
Rinse the milk system automatically.
Combine cleaning and descaling. Re-
move residues of limescale and cof-
fee from the pipes.
Remove residues of coffee from the
pipes.
Remove residues of limescale from
the pipes.
Drain the pipes to protect the appli-
ance during transport or storage.
of the brewing unit step by step.
The display shows optimum manual
cleaning of the beverage dispenser
and milk system step by step.
If a service programme is interrupted,
e.g. due to a power failure, it will rinse
itself automatically. The appliance is
then ready for use again.
Advertenties
Hoofdstukken
Inhoudsopgave
