Inhoudsopgave
Advertenties
EN
B1-1
Right Handle
B1-3
Battery Pack Port B2-1
B2-2
Washer
B2-4
Cable Plug
INSTALLING A POWER HEAD ATTACHMENT
WARNING:
Read and understand entire Operator's
Manual for each optional attachment used on this power
head and follow all warnings and instructions. Failure to
follow all instructions could result in electric shock, fire
and/or serious personal injury.
WARNING:
This 56 V power head PHA7400E is
designed to be used only with the EGO attachment
models that are specified in this Operator's Manual or
subsequently introduced by EGO for use with this power
head. Use of other, unauthorized attachments could cause
serious personal injuries or property damage.
WARNING:
Never install, remove, or adjust any
attachment while the power head is running or with
the battery installed. Failure to stop the motor and
remove the battery can cause serious personal injury.
NEVER OPERATE THE POWER HEAD WITHOUT AN
ATTACHMENT.
OPERATION
ATTACHING/DETACHING THE BATTERY PACK
Use only with EGO's battery packs and chargers listed in
Fig. A2.
Fully charge before first use.
To attach
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a "click" (Fig. C1).
To detach
Depress the battery-release button and pull the battery
pack out (Fig. C2).
C1-1
Mounting Slot
Battery-Release
C2-1
Button
8
56-VOLT LITHIUM-ION CORDLESS AUGER POWER HEAD — PHA7400E
STARTING/STOPPING THE POWER HEAD (Fig. D)
Left
B1-2
◾
Handle
Bolt
B2-3
Nut
NOTE:
Cable
B2-5
speed with increased trigger pressure and lower speed
Socket
with decreased trigger pressure.
◾
D-1 Lock-off Button
SELECTING ROTATION DIRECTION AND SPEED
(Fig. E)
Hold the right handle with your right hand.
◾
◾
◾
NOTE:
and reverse is only possible when the power head is
stopped.
NOTE:
at any time, regardless if the power head is started or
stopped.
E-1
C1-2
Rib
To turn the power head on, press and hold the lock-
off button and then squeeze variable-speed trigger
switch. Release the lock-off button and continue to
squeeze the trigger switch for continued operation.
The variable-speed trigger switch delivers higher
To turn the power head off, release the trigger switch
and allow the auger bit to come to a complete stop.
D-2
Push the selector to the "2" position to activate
forward rotation at high speed.
Push the selector to the "1" position to activate
forward rotation at low speed.
Push the selector to the "R" position to activate reverse
rotation.
Switching direction of rotation between forward
The forward speed adjustment could be achieved
Rotation Direction / Speed Selector
Variable-speed
Trigger Switch
Advertenties
Inhoudsopgave
