Inhoudsopgave
Advertenties
1
Awning 1x
Measure the distance between
the outsides of the articulated
arm brackets.
2
Mounting bracket 2x
(e.g. in concrete)
The mounting brackets 2 must
be installed level and at least
250 cm above the ground.
The distance between the in-
sides of the mounting brackets 2
is x + 4 cm.
Mark the installation holes of
the mounting brackets 2 on the
wall.
3
According to your wall type, drill
the holes and install the fasten-
ings.
Install the mounting brackets
2 at the fastenings and check
them for secure fixation.
Alternatively the mounting
brackets 2 can be installed to
a ceiling, using its two upper
holes.
104
|
ENGLISH
Outside of brackets = x
Only for version
10179662, 12209706,
12209710, 12209713,
12209720, 10179648,
12209707, 12209711,
12209714, and 12209721:
Fix the third mount-
ing bracket centered
6 cm
between the outer
brackets.
=
=
x + 4 cm
4
Awning 1x
Install the square tube 5 of the
awning to the lower openings
of the mounting brackets 2 and
secure it with the two screws
supplied.
5
Hand Crank 1x
Install the hand crank 7 to the
hand crank eyelet 10 on end
bracket of the awning.
6
Rotate the hand crank 7 in either
clockwise or anti-clockwise
direction in order to extract or
retract the awning.
Keep the hand crank in a vertical
position during use to prevent
the hand crank eyelet 10 from
damages.
ENGLISH
|
105
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
