Inhoudsopgave
Advertenties
Note:
The power units have been adapted to hold a
medium-sized soldering tip. Discrepancies may occur if the
tip is changed or a different shaped tip is used, but these
can be overcome using the offset function.
6.3 Switching off the device
Press the + and – button until "OFF" appears on the
display
Note
If you do not intend to use the soldering iron for longer
periods, set the disconnecting switch to "O".
Make sure that the battery is charged at least 50 %, see
Information on the application note for battery on page 8.
Soldering tip change
Caution, risk of burning!
Tools are not required to change the soldering tip.
Only change a cold soldering tip.
The soldering tip is inserted in handle (24) and can be
removed by simply pulling the soft grip on the soldering tip
(25).
Important
- Change the soldering tip when cold.
- Always ensure that the soldering tip is seated properly.
6.4 Switching the temperature unit
Switching the temperature unit from "°C to °F" (8) or vice
versa.
1. Select the menu item "°C / °F" in the menu.
2. Set the temperature unit with the - or + button.
3. The display reverts to the normal temperature
if no buttons are pressed for about 2 seconds.
The stem is fitted with a sensor that monitors device use,
i.e. when the stem is inserted in the rest, the temperature
is reduced to standby temperature after 5 minutes and
switched off after 5 more minutes.
All manuals and user guides at all-guides.com
7. Special functions for
Setting the standby temperature
The following standby temperatures are available
(150 °C – 250 °C / 300 °F – 480 °F).
1. Select the "STANDBY" (18) menu item in the menu.
2. Set the setpoint value for the standby temperature with
3. The display reverts to the normal temperature
Setting the automatic switch-off time (AUTO-OFF)
The following AUTO-OFF time settings (17) are available:
- "10 – 60 min." AUTO-OFF time, individually adjustable
1. Select the menu item "OFF" in the menu.
2. Set the AUTO-OFF setpoint time value with the - or +
WSM 1 / WSM 1C
after 3 s without pressing button
Actual value
+ or -
display
Preset SETBACK
+ and -
TIME after
5 min of disuse
Preset standby
2 s
temperature
200 °C
4 s
Preset OFF-
SET TIME after
5 min of disuse
6 s
OFF
8 s
OFF
10 s
12 s
14 s
the - or + button.
if no buttons are pressed for about 3 seconds.
button.
English
Setpoint value
display
OFF
OFF
STANDBY
AUTO OFF
OFF SET
SETBACK
°C / °F
LOCK
10
Advertenties
Inhoudsopgave
