Inhoudsopgave
Advertenties
Translation of the original instructions
Do not operate the device with a damaged power
supply cord or a damaged mains plug.
Never charge a frozen or damaged battery.
Do not cover the device.
Do not place the device near a fire or subject it
to heat or to longterm temperatures exceeding
50°C.
Do not obstruct the cooling vents. Refer to the ins-
tallation section before operating the machine.
The automatic mode of operation and usage res-
trictions are explained below in these operating
instructions.
Risk of explosion or acid projection in case of
short-circuit of the clamps or if the 12V booster is
connected to a 24V vehicle or vice versa.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• During the charge, the battery must be placed
in a well ventilated area.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery
against short-circuiting.
Connection / disconnection:
• Disconnect the power supply before connec-
ting/disconnecting the device to/from the bat-
tery.
• The terminal of the battery that is not connec-
ted to the car frame must be connected first.
The other connection must be made on the car
frame, far from the battery and the fuel line. The
battery charger must be connected to the power
supply network.
GYSPACK AIR
EN
11
Advertenties
Inhoudsopgave
