Inhoudsopgave
Advertenties
Tips: how to detach the upper part from the dust barrel
1. Find the lock icons on the side of the dust barrel. The arrow is pointing at the locked one.
2. Turn the upper part anti-clockwise and the arrow will be pointing at the unlocked one; then lift it.
Note: After cleaning, the upper part should be dried thoroughly before reassembling. Remember to turn the
arrow to the locked icon when assembling back the dust barrel.
b. Exhaust air filter
1. Always unplug the unit from electrical outlet first.
2. Press the release button to open the exhaust cover.
3. Take out the exhaust air filter for cleaning or changing. To clean it, rinse it under cold running water and
allow it to dry thoroughly before putting it back.
4. Remember to close back the exhaust cover after installing the filter.
Please note:
The filters in the cleaner will became dusty over time. This is normal and will not affect the performance of
the filter. If the filters are so dusty that suction does not return to 100%, we suggest that the filters be
removed then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or some
high temperature objects before refitting into the vacuum. This should be done once six months or when
suction appears to be reduced obviously.
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat
and could become damaged.
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters
must be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical
outlet when checking the filters.
filter
Hepa exhaust air
- 15 -
Advertenties
Inhoudsopgave
