Inhoudsopgave
Advertenties
Application (app)
An app is required to use the digital connection You can download
the app from the corresponding stores for the specific type of terminal
device:
!
Make sure that the wireless interface of the mobile device
is activated.
After starting the app and activating the digital connection, a connection
can be set up between a mobile device and the measuring device.If the
app detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it is
switched on.
Memory function:
or
Important notices
– The laser points to the location that will be measured.
No objects may get into the laser's line of measurement.
– The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
– The device is only conditionally useable in outdoor areas and cannot
be used in strong sunlight.
– The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
– In unfavourable conditions, e.g. with poorly reflecting surfaces,
the maximum deviation may be greater than 3 mm.
– Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
– Measurements made through glass (window panes) can falsify
measurement results.
– An energy-saving function switches the device off automatically.
– Clean with a soft cloth. Water may not be allowed to penetrate
the housing.
DistanceMaster Compact Pro
3 sec
View stored values
17
EN
Advertenties
Inhoudsopgave
