Inhoudsopgave
Advertenties
Angle function 3:
Angle function 3 1. measurement 2. measurement
The measurement result is determined by the 360° inclination sensor.
!
Angle function 1, 2, 3: The back of the device can be used
as a reference surface for measuring angles.
min/max continuous measurement:
The LC display shows the max value, the min value and the current value.
Data transfer
This device has digital connectivity which allows wireless data transfer to
mobile devices such as smart phones or tablets with a wireless interface.
The system prerequisites for a digital connection are specified at
http://laserliner.com/info?an=ble
This device can generate a wireless connection to devices which are
compatible with the wireless standard IEEE 802.15.4. The wireless
standard IEEE 802.15.4 is a transfer protocol for Wireless Personal Area
Networks (WPAN). The range is set to a maximum distance of 10 m from
the terminal device and greatly depends on the ambient conditions such
as the thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Enable / disable Digital Connection:
Digital Connection
When enabled the Digital COnnection symbol appears on the display (e).
When the function is active, a mobile device can connect by means
of an app to the measuring device.
16
EN
1x
2x
Press for 3 seconds
then release button
3 sec
1x
enable
1 sec
1x
3x
4x
disable
1 sec
2x
result
height
stop
2x
Advertenties
Inhoudsopgave
