Advertenties
EN
Translated version of the installation manual
CONTENTS
1 - Safety instructions
1.1 Caution - Important safety instructions
1.2 Introduction
1.3 Preliminary checks
1.4 Electrical installation
1.5 Safety instructions relating to installation
1.6 Regulations
1.7 Assistance
1.8 Danger zones
2 - Product description
2.1 Product components - Fig. 1
2.2 Scope of application - Fig. 2
3 - Installation
3.1 Installation height - Fig. 4
3.2 Detailed description of installation steps -
Fig. 5 to 15
4 - Programming
4.1 Programming button description
4.2 End limit setting and self-learning - Fig. 16
4.3 Memorising the remote controls for operation in «Total opening» mode - Fig. 17
5 - Operating test
5.1 Using the remote controls - Fig. 18
5.2 Obstacle detection function - Fig. 19 et 20
5.3 Built in lighting operation
5.4 End-users training
6 - Connecting peripherals
6.1 Description of the various peripherals - Fig. 21
6.2 Electrical connections for the various peripherals - Fig. 21 à 30
7 - Setup
7.1 Meanings of the various parameters
8 - Special operation
9 - Clearing remote controls and all settings
9.1 Clearing remote controls - Fig. 37
9.2 Resetting all settings - Fig. 38
10 - Locking programming - Fig. 39
11 - Refitting covers - Fig. 40
12 - Troubleshooting
12.1 Operating codes displayed
12.2 Programming codes displayed
12.3 Error and failure codes displayed
12.4 Accessing stored data
13 - Technical specifications
13.1 Dimensions
1
1 SAFETY INSTRUCTIONS
> Please read carefully
Please read the safety instructions very carefully as well as the product
1
installation and user guides before installing and using this product.
1
This symbol indicates a danger, the different degrees of
1
which are described below.
2
2
2
3
Indicates a danger which may result in immediate death or serious
3
injury
3
5
5
Indicates a danger which may result in death or serious injury
5
6
6
Indicates a danger which may result in minor or moderate injury
6
6
6
6
Indicates a danger which may result in damage to or destruction of
7
the product
7
7
7
The motorisation must be installed and adjusted by a professional
7
motorisation and home automation installer, in compliance with
7
the regulations of the country in which it is to be used.
7
Non-observance of these instructions can result in serious injury
7
to persons, e.g. when trapped by a door.
7
8
1.1 Caution - Important safety instructions
8
9
9
For reasons of personal safety, it is important to follow all the
9
instructions, as incorrect installation can lead to serious injury. Retain
9
these instructions.
The installer must imperatively instruct all end-users to warranty a
9
safe usage of the motorisation according to the user manual.
9
The user manual and installation manual must be given to the
10
end-user. The installer must explicitly inform the end-user that
10
installation, adjustment and maintenance of the motorisation must
10
be performed by a professional motorisation and home automation
10
installer.
10
11
1.2 Introduction
11
> Important information
This product is a motorisation for vertically or horizontally opening
garage doors, for residential use as defined in standard EN 60335-2-
95 and EN 60335-2-103, with which it complies. The main purpose of
these instructions is to satisfy the requirements of the aforementioned
standards and to ensure the safety of equipment and persons.
Any use of this product outside the scope of application described in
this manual is prohibited (see "Scope of application" paragraph in the
installation manual).
The use of any accessories or components not validated by Somfy is
prohibited - safety of persons won't be ensured.
DANGER
WARNING
PRECAUTION
ATTENTION
DANGER
WARNING
WARNING
Copyright © 2017 Somfy SAS. All rights reserved
Dexxo Pro RTS
Advertenties
