Download Print deze pagina

Siemens KA D Series Gebruiksaanwijzing En Installatievoorschrift pagina 32

Verberg thumbnails Zie ook voor KA D Series:

Advertenties

en
Switching on the appliance
When connected, the appliance is switched on. A
warning signal sounds.
Press the Alarm/lock button. The warning signal
switches off.
Display "alarm" goes out when the appliance has
reached the set temperature.
The preset temperatures are reached after several
hours. Do not put any food in the appliance
beforehand.
The factory has recommended the following
temperatures:
Freezer compartment: -18 °C
Refrigerator compartment: +4 °C
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
Setting the temperature unit
To set the temperature unit, simultaneously press
the "freeze" button and the "cool" button for
5 seconds.
Depending on the previous setting, the display
switches to the other temperature unit.
Setting the temperature
Freezer compartment
The freezer compartment can be set from -14 °C to
-24 °C.
We recommend a setting of -18 °C.
The value last indicated is saved by the system.
1. Press the "freeze" button until "freeze" is lit on the
freezer compartment display panel.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.
Refrigerator compartment
The refrigerator compartment can be set from +2 °C
to +8 °C.
The temperature can be set at 1 °C intervals.
32
The value last indicated is saved by the system.
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
1. Press the "cool" button until "cool" is lit on the
refrigerator compartment display panel.
2. Set the temperature with the + (warmer) or - (cooler)
setting buttons.
Alarm function
Press the "alarm/lock" button to switch off the warning
signal.
In the following cases an alarm may be actuated:
Door opening alarm
If the appliance is left open for longer than one minute,
the door alarm switches on. Close the door or press the
Alarm button 4 to switch the warning signal off again.
Temperature alarm
The temperature alarm switches on if the freezer
and refrigerator compartment is too warm and the food
is at risk of thawing.
The acoustic and optical signals may be actuated
without risk to the frozen food when:
The appliance is switched on.
Large quantities of fresh food are placed
in the freezer.
Freezer compartment
The set temperature of the freezer compartment flashes
and "alarm" is displayed on the display panel.
The temperature display indicates for 10 seconds
the warmest temperature which was reached
in the freezer compartment. Then the set temperature is
displayed again.

Advertenties

loading