Inhoudsopgave
Advertenties
• Open the compartment (11) and unwind the power cord (10) entirely (Fig.5).
• Entirely straighten the power cord.
• Close the compartment (11) taking care that the cord passes through the prepared hole
(10) (Fig.5).
• Place the appliance in an appropriate environment and on a stable and flat surface.
Select a firm, level, flat location at least 15cm from any wall or object
for proper air flow.
We will not accept responsibility for damage caused by water
spillage.
• Make sure that curtains or other objects do not obstruct the air flow (fig. 3).
• Leave at least 1m of free space on the sides of the appliance, behind and above it (fig.
2).
• If it is desired to use humidification mode, proceed with the filling of the water tank as
described in the next paragraph.
• Connect the plug to the power socket.
• Make sure the mains data correspond to what is indicated on
the nameplate of the appliance.
• Place the cord in non-passage areas so as to avoid tripping.
2.1 - FILLING (Fig.6)
Before filling the tank, always make sure that the appliance is
disconnected from the power socket.
a. Press on the lid (4a) of the water input compartment (4) to open it.
b. Pour drinking water into the compartment (4) taking care not to exceed the "MAX"
filling level.
Do not pour flavours or other additives inside the tank.
it is desired to use humidification mode, make sure there is always water
inside the tank.
Pay attention not to exceed the "MAX" level by checking the indicator (7).
If this limit is exceeded, exceeding water will start to come out from the hole
(6).
QUARZIA HUMI
EN - 9
Advertenties
Hoofdstukken
Inhoudsopgave
