The toasting result may vary at the same setting depending on
the type, size, moisture and thickness of the bread slices. The-
refore, select a lower setting when toasting less moist bread,
smaller slices or only one slice.
When toasting only one slice, the browning level on the side
facing inwards will be slightly more intensive.
Acrylamide is generated during exces-
sive browning. Excessive browning of the
toast should therefore be avoided.
Interrupting the toasting process
Press the illuminated button to interrupt the toasting process.
Warming / retoasting
If the warming button is pressed immediately after switching on
the appliance, cold but already toasted bread will be crisped up
and too lightly toasted bread will be slightly retoasted.
Defrosting
If this button is pressed directly after the appliance is switched
on, the toasting cycle will be extended automatically to toast
frozen bread.
Bread roll attachment
The toaster is fi tted with an integrated roll attachment, which
can be used by pressing the button downwards.
Two rolls can be warmed up from either side on a medium setting
in each case. Rolls which are too dry should be moistened slightly
beforehand - it works better this way.
Crumb tray
Crumbs produced during toasting are collected in the crumb tray.
You can then pull the tray out of the appliance.
Cleaning and maintenance
Before cleaning, disconnect the appliance from the mains and
allow the appliance to cool down. Use a hard brush to remove
crumbs sticking to the grids and the heater. Do not tilt the appli-
ance while you do this, or crumbs will spill from the crumb tray
into the inside of the toaster. Then pull out the crumb tray, clean
it and reinsert.
Never immerse the toaster in water. Wipe the outside of the
appliance only with a damp cloth and some washing-up liquid.
Do not use harsh or abrasive cleaning agents.
11