Inhoudsopgave
Advertenties
16.6 Vacuum sealing in the vacuum container
1. Connect the vacuum hose to the
device. Block the device in the open
position so that the lid is slightly open
during vacuuming of the container.
2. Attach the other end to the container
lid. Depending on the container, use an
adapter if necessary (see operating
instructions for your vacuum container)
► Make sure that both ends of the
hose connection (with use of an
adapter if necessary) are correctly
connected to the device and to the
container lid
3. Press the Vakuum & schweißen"-Button. Briefly press the lid of the container at the
beginning. The device stops automatically when the vacuum is reached. The vacuum hose
and, if necessary, the adapter can then be removed.
16.7 Storing your vacuum sealing system
Keep the unit in a flat and safe place, out of the reach of children.
► To disconnect remove the plug from the outlet.
► Always unplug this appliance from the electrical outlet immediately
after using and before cleaning.
► For correct storage turn the lever to position STORE, do not lock the cover, it will
deform the gaskets and affect the machine function.
17 Cleaning and Maintenance
This chapter provides important information on properly cleaning and maintaining your
vacuum sealer.
17.1 Safety information
Attention
Please observe the following safety notices, before cleaning the unit to avoid
damage to the unit or personal injury:
► To ensure optimum performance, the unit must be cleaned regularly. Failure to clean
the unit regularly can lead to potential malfunctions, as well as safety and health risks.
► Unplug the device before cleaning.
Please note
Please note
41
Advertenties
Inhoudsopgave
