Download Inhoudsopgave Inhoud Print deze pagina

Installation; Operation - Dometic NDS Power Switch 100 Montagehandleiding En Gebruiksaanwijzing

Scheidingsrelais
Verberg thumbnails Zie ook voor NDS Power Switch 100:
Inhoudsopgave

Advertenties

• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
5

Installation

NOTICE! Damage hazard
Do not connect any devices with more than 100 A or 2000 W to the split charge relay. Connect
devices with more than 100 A or 2000 W directly to one of the batteries.
If one or more loads are connected directly to a battery, the corresponding battery cannot be
switched off by the split charging relay.
Connect the split charge relay as follows.
NOTE Connect the negative terminal
Fig. 
on page 3
No.
1
2
3
4
5
Fig. 
on page 4
No.
Description
1
Negative terminal connection with a cable cross-section of 1.5 mm²
2
Positive terminal connection of the house battery 1
3
Positive terminal connection for RV devices
4
Positive terminal connection of the house battery 2
5
Remote control connection
6

Operation

Disconnecting the batteries
1. Press the selection button for 5 s.
The house batteries are disconnected from the split charge relay.
NOTE The batteries are automatically replaced as a power source when a power source, e.g.,
an alternator, is detected.
2. Press the selection button for 2 s to reconnect the house batteries.
Description
Split charge relay
House battery 1
RV devices (solar modules, inverter, RV control unit, auxiliary power unit, and battery charger)
House battery 2
Remote control
(Fig. 
1) last.
9

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Dometic NDS Power Switch 100

Inhoudsopgave