Download Inhoudsopgave Inhoud Print deze pagina

Unit Installation; Making Secure; Electrical Connection; Technical Data - Stiebel Eltron CBS 20 S Gebruikers- En Installatiehandleiding

Wand-snelverwarmer
Inhoudsopgave

Advertenties

• The unit is to be fitted in such a way that
switching and control devices cannot be
touched by anyone in the bath or under the
shower.
• If the mains connection cable is changed,
this may only be replaced with original
Stiebel Eltron spare parts by a qualified in-
staller.

2.3 Unit installation

If the unit is exchanged for a unit of the CK...
series produced by Stiebel Eltron, the same
fixing holes can be used to secure the unit
(observe minimum distances!).

2.3.1 Making secure

The following action should be taken to se-
cure the equipment:
 screw the supplied hanging bracket (3)
horizontally to the installation wall. - bracket
with the cut-out facing upwards -. Use suit-
able securing materials (screws, dowels),
according to the type of wall. Using the
horizontal and vertical elongated hole, align-
ment is possible if the fixing hole is out of
true.
 Hang the unit onto the hanging bracket using
the upper vertical recesses of the unit rear
panel.
 Screw up the unit and hanging bracket with
the securing screw (4).

2.4 Electrical connection

Electrical connection can only be made to an
a.c. 230V ~ 50 Hz supply.
For the purpose of connection, an earthed
socket or unit connection box for permanent
connection should be installed at the side of
the heating unit, at least 10 cm away from it.
In the case of a permanent connection, the
connection cable must not lie against the unit
and should be shortened in such a way (cut
off the plug) that it leads directly to the per-
manent connection box.
The stripped wire ends are tipped with wire
end sleeves.
2.5 Handover
Explain the functions of the unit to the user.
Draw his or her attention to the safety in-
structions, in particular. Hand the operating
and installation instructions to the user.
121 mm
26 mm
3
X2

Technical data

Type
Dimensions H / W / D
Weight
Connection
Output
Temperature adjustment range
Frost protection
Protection class
Protection mode
Approvals
M
1 ~
R
1
N1
F1
1
2
X1
1
X2
N2
L
N
1/N ~ 230 V
L
275 mm
2
mm
kg
1/N ~ 230 V 50 Hz
kW
ºC
ºC
see unit rating plate
2
X1
in the case of operation with external
room thermostat
N
1
CBS 20 S
400 / 275 / 95
2,8
2,0
approx. 5 to 35
approx. 6
II
IP 24, splash-proof
9

Advertenties

Inhoudsopgave
loading

Inhoudsopgave