Inhoudsopgave
Advertenties
Wiring notes
Fuse types
Drive input fuses are provided to disconnect the drive from power in the event
that a component fails in the drive's power circuitry. The drive's electronic pro-
tection circuitry is designed to clear drive output short circuits and ground
faults without blowing the drive input fuses. The table below shows the VSC
input fuse ratings.
To protect the VSD most effectively, use fuses with current-limiting function.
RK5, CC/T TYPE FUSE FOR VSC
VSC 48- HP
009
440V
013
class (3φ)
018
Fuse ratings are based upon 500V for 460V VSDs
• To avoid shock hazards, do not touch any electrical component when the
power is applied or until the power plug has been disconnected for five min-
utes. Other action should be performed after the change indicator goes off.
• Do not wire the on the VSD while it is still electrified. Disregarding this
could cause serious injury or death.
This product is designed for use in Pollution Degree 2 environment or equiva-
lent environmentsenvironments or equivalent.
Emotron AB 01-3990-11r3
KW
KVA
5
3.7
6.7
7.5
5.5
9.9
10
7.5
13.3
100% CONT
Max.RK5
Output
FUSE
AMPS (A)
Rating(A)
8.8
20
13
25
17.5
30
Max.CC or T
FUSE
Rating(A)
30
35
50
Wiring notes
49
Advertenties
Inhoudsopgave
Probleemoplossen
