Download Inhoudsopgave Inhoud Print deze pagina

emerio IM-128458 Handleiding pagina 9

Inhoudsopgave

Advertenties

turn on
The "ICE FULL" condition cannot be
simultaneously.
detected as the infrared light module
is interfered by the sunlight.
The ice collects
Making ice takes too much time.
together.
The water temperature is too low.
The ice-making cycle
The ambient temperature or water
seems normal but
temperature is too high.
no ice is produced.
Refrigerating system leaks
Refrigerating system blocks
Poor ice-making
Poor heat dissipation
result
The water temperature is too high.
The ambient temperature is too high. Operate the ice maker in ambient temperature
TECHNICAL DATA
Voltage: 220-240V ~ 50-60Hz
Power: 120W
Rated Current: 0.8 A
Foaming agent: C
H
5
10
Refrigerant: R600a/23g
Climatic class: ST/SN/N/T
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective
product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction manual,
will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we
hold responsible for material damage or personal injury caused by improper use or if the instruction manual are
not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such
case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge.
Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of
said parts are not covered by the warranty and are to be paid.
Unplug the appliance and move it to a place which
is not exposed to the sunlight, then plug the
appliance and activate it again.
Stop making ice and restart the ice-making cycle
after the ice melts.
Fill the water tank with water ranges between 8 ℃
and 25 ℃.
Operate in ambient temperature between 10 ℃ and
43 ℃ and fill the water reservoir with some cold
water.
Need to repair.
Need to repair.
Leave a 6-inch clearance on all sides of the ice
maker for proper ventilation.
Fill the water tank with water ranges between 8 ℃
and 25 ℃.
between 10 ℃ and 43 ℃.
- 8 -

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor emerio IM-128458

Inhoudsopgave