Inhoudsopgave
Advertenties
IM-128458
PARTS DESCRIPTION
1. Handle
2. Transparent lid
3. Evaporator
4. Ice tray
5. Ice shovel
6. Water tank
7. Ice cube basket
8. Ice cube scoop
9. Control panel
10. Infrared light-emitting diode
11. Infrared light-receiving diode
12. Filter
13. Drain plug
Control panel
1.
On/off button
2.
Power indicator light
3.
"ADD WATER" indicator light
4.
"ICE WATER" indicator light
5.
Select button
6.
Small size ice cube
7.
Large size ice cube
8.
Self-clean indicator light
BEFORE USE
1. Remove all the packaging.
2. Place the appliance on a stable and flat surface. Keep the appliance away from heat sources and direct
sunlight; keep it in a well-ventilated place and leave at least 6-inch space near the air inlet and outlet.
3. Clean the appliance and its components (See "CLEANING AND MAINTENANCE").
4. Do not fill the water tank with hot water. This may damage the appliance. It is best to fill with water of room
temperature or lower.
Caution! Do not use outdoors. Do not use the appliance in a too cold or too hot environment. When the
environment temperature is lower than 10 ℃ or higher than 43 ℃, the appliance will have problems in making
ice. The optimum ambient temperature is around 25 ℃.
Note: The incline angle of the ice maker cabinet should not exceed 45°during transportation or use. Do not
turn the ice maker upside down. Doing so could cause the compressor or refrigerating system to operate
incorrectly. Please allow time for the fluids in the compressor to settle after the ice maker is moved or
transported. Before using the ice maker for the first time, please wait for 3 hours after the unit has been
positioned in the proper place.
HOW TO USE
1. Ensure that the drain plug at the bottom of the water tank is closed well.
- 5 -
EN
Advertenties
Inhoudsopgave
