Ferroli OMNIA S 3.2 Installatie-, Gebruiks- En Onderhoudshandleiding pagina 108
Verberg thumbnails
Zie ook voor OMNIA S 3.2:
- Installatie-, gebruiks- en onderhoudshandleiding (69 pagina's) ,
- Installatie-, gebruiks- en onderhoudshandleiding (65 pagina's)
Advertenties
8.6 HEAT, COOL and DHW setpoint settings
SW6
SW1
SW3
SW4
SW2
SW7
SW5
NOTE
The
icon indicates which setpoint is being
modified
108
EN
DHW set point (min 30°C, max 60°C)
To change the DHW set point, proceed as follows:
•
press the SW1/SW2 buttons to select the set point
•
press the SW6/SW7 buttons to change the set point
•
confirm the modified value with the SW3 button
Single zone set point
Heat setpoint (min:max)
Type of terminal selected
FLH (radiant floor)
FCU (fancoil) / RAD (radiator)
(Cooling min 5°C, max 25°C - Heating min 25°C, max 65°C)
To change the single zone set point, proceed as follows:
•
press the SW1/SW2 buttons to select the set point
•
press the SW6/SW7 buttons to change the set point
•
confirm the modified value with the SW3 button
Zone Z1 set point
Heat setpoint (min:max)
Type of terminal selected
FLH (radiant floor)
FCU (fancoil) / RAD (radiator)
(Cooling min 5°C, max 25°C - Heating min 25°C, max 65°C)
To change the set point of zone Z1, proceed as follows:
•
press the SW1/SW2 buttons to select the set point
•
press the SW6/SW7 buttons to change the set point
•
confirm the modified value with the SW3 button
Set point zone Z2+
Heat setpoint (min:max)
Type of terminal selected
FLH (radiant floor)
FCU (fancoil) / RAD (radiator)
(Cooling min 5°C, max 25°C - Heating min 25°C, max 65°C)
To change the zone Z2 set point, proceed as follows:
•
press the SW1/SW2 buttons to select the set point
•
press the SW6/SW7 buttons to change the set point
•
confirm the modified value with the SW3 button
Cod. 3541V941 - Rev. 05 - 06/2022
Cool setpoint (min:max)
25: 55
18: 25
25: 65
5: 25
Cool setpoint (min:max)
25: 55
18: 25
25: 65
5: 25
Cool setpoint (min:max)
25: 55
18: 25
25: 65
5: 25
OMNIA S 3.2
Z1
Z2
Advertenties
