Inhoudsopgave
Advertenties
• It is imperative that you adhere to the information in the
instruction manual for the angle grinder used. This device must correspond to the VDE standards.
Only devices with a CE symbol are to be used.
• Keep children away from the workplace and also keep the tools out of the reach of children.
• Always wear protective goggles, ear protection, protective gloves and a mouth or nose protection
respectively.
• Wear suitable working clothes; do not wear any wide clothing or jewellery as they could be caught
up in moving parts. Non-slip shoes are recommended. Wear a hair net if you have long hair.
• Before use, ensure that the device is correctly and securely mounted in the retainer.
• Never stop the cutting disc with the hands or other objects. Never reach into the working area of the
running cutting disc or touch the cutting disc during the work. There is a risk of injury!
• Fix the cutting stand on both of the mounting perforations to the base plate (1) on the workbench.
Ensure that the bench and the stand are securely positioned.
• Ensure that the workplace is clean and well illuminated.
• Always use the protective cover (22).
• Only use the cutting stand with an angle grinder which is equipped with the suitable metal protective
cover around the cutting disc.
• Position this protective cover so that the cutting disc runs freely in the open part and so that
the protective cap is unable to make contact with the work piece.
• Cutting work generates sparks. Ensure that no flammable
materials are in the working area. Sparks can damage paint, glass and other surfaces. Do not wear
any nylon or polyester clothing, but suitable non-flammable work clothes.
• Ensure that the mains cable does not protrude into the working area of the disc or where sparks
are flying.
• Ensure that the work piece is correctly fixed in position between the two clamping jaws and is firmly
positioned on the base plate.
• Do not use work pieces which are too large to be fixed in position between the two clamping jaws.
• Clamp the work piece so that it is stress-free.
• Secure the cut-off material in order to avoid injuries resulting from flying or falling work pieces.
• Ensure that the cutting disc is not tilted and that it is always sufficiently tightened.
• Do not remove the work piece when the disc is rotating.
• Ensure that it is not used together with liquids.
• Regularly inspect the firm seating of all of the screws before and during use as they can become loose
due to vibration.
• Regularly inspect both the stand and the cutting disc for any damage. Under no circumstances should
you use a disc if you should determine any dents, notches or other forms of damage. The stand
is also not to be used if you detect any damage.
• Ensure that the cutting disc of your angle grinder is mounted perpendicular to the base plate.
• Only use cutting discs and no roughing discs.
• Always observe the cutting depths as there is otherwise the risk of damaging your workbench.
• Always use the lever (29) of the cutting stand to bring the machine into the end position.
• Always remove the plug of your angle grinder from the socket when not in use, changing the disc and
when completing all cleaning and adjustment work.
• All liability and warranty claims will be excluded in the case of the use of non-permitted drive devices
and the making of all technical modifications to the cutting stand.
t
Safety instructions
10
Advertenties
Inhoudsopgave
