Advertenties
GB
Use [START] or [HOME] to select the year
you want. Then press [OK] to confirm to fin-
ish the year setting.
Meanwhile, the icon [ ] will flash again and
a number will be displayed to indicate the
date, for example, 08.25, meaning August 25.
When [0-.--] is flashing, use [START]
or [HOME] to select the number and
press [OK] to confirm. Then finish the date
setting.
Meanwhile, the icon [ ] will flash and the
time will be displayed, for example, 13:25.
When [0-:--] is blinking, use [START]
or [HOME] to select the number and
press [OK] to confirm.
Now the time setting is completed, on the
screen, it will show [IDLE].
Change default start time
► P. 10, fig. 5
The default start time of 9:00 can be changed
to anytime by pressing [START] and [OK]
buttons at the same time for 3 seconds, For
example if you want to change the time
to13:25, When [0-:--] is flashing,
use [START] or [HOME] to to select the num-
ber and press [OK] to confirm, Then [IDLE]
will show on the display and your mower will
start mowing from 13:25, at the same time
you will hear a beep.
Change default Mowing time per day
► P. 10, fig. 6
The default cutting time is 3 hours per day,
you can change it to 1–24 hours. keep press-
ing [OK] buttons for 3 seconds, For example
if you want to change to 06H, When [06 H] 0
is flashing, use [START] or [HOME] to select
the number and press [OK] to confirm.
Then [IDLE] will be showed on the display.
Then your mower will mow 6 hours per day, at
the same time you will hear a beep.
Change default mowing time per week
The default cutting time per week 5 day, you
can be change to 3 or 7 day, keep press-
ing [HOME] and [OK] buttons for 3 seconds,
For example change to 3 day per week, [-05-]
is flashing, use [START] or [HOME] to select
the number and press [OK] to confirm.
Then [IDLE] will be on the display.
Change default setting of raining sensor
Keep pressing [HOME] for 3 sec-
onds,then [RAIN] will be showed on the dis-
play. Press [OK] to enter the settings inter-
face. Then [ON] or [OFF] will be showed, you
54
can change the settings by pressing [START]
and [HOME] button and press [OK] to con-
firm.
Note: The robotic lawnmower per-
forms an edge cut every Tuesday
and Friday.
Cleaning and maintenance
DANGER! Risk of injury! Carry
out the maintenance work
described here in person.
Improper maintenance work can
damage the device and lead to inju-
ries.
DANGER! Risk of injury! Before
carrying out any maintenance or
cleaning work, the machine must be
disconnected from the power and
secured to prevent accidental
switch on.
Maintenance
Your Mower works hard and needs to be
cleaned and checked from time to time. Some
parts will require replacement as they
become worn. Switch off the machine before
carrying out any service or maintenance.
Here's how to take care of your Mower.
Keep it sharp
CAUTION! Risk of injury! Never
touch the blade on the cutting edge.
Wear gloves at all times when work-
ing with the blade.
WARNING! Risk of injury! Before
cleaning, adjusting, or replacing the
blades, turn your Mower OFF and
put on protective gloves.
CAUTION! Risk of injury! When
fitting new blades, make sure you
replace all the blades. It's not man-
datory to replace all screws if they
are in good condition, if the screw
has been damaged or unable to be
fixed, then need new screw for
mount the blade. This is important
to ensure blade retention and bal-
ance the blade turning disc. Failure
to use new screws could cause
serious injury.
Advertenties
Hoofdstukken
